EMX2 is both a mixer and a power amplifier. Lightweight and portable design make it very easy to carry and particularly useful for various events.

Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.


I/O Inputs TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3
Phantom power CH1, 2 : +30 V
Control and others FOOT SW : Effect Mute on/off
Bus Stereo: 1, Effect: 1
Input Channel Function PAD 26 dB (CH1-4)
Hi-Z Supported (CH4)
EQ HIGH 8kHz +15dB / -15dB
EQ MID 2.5kHz +15dB / -15dB
EQ LOW 100Hz +15dB / -15dB
On-board processors DSP SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
On-board amplifiers Maximum output power @4ohms 1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
Maximum output power @8ohms 1kHz THD+N less than 10% (CEA2006) : 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
Level Meter 6points (-20, -6, 0 , +3, +6, LIMITER)

General specifications

Frequency response Input to SPEAKERS : +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)
Hum & noise level Equivalent input noise -115 dBu
Residual output noise Input to SPEAKERS : -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)
Crosstalk -80 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit Load protection DC-fault
Amplifier protection Over heat protection, Over current protection
Power requirements AC 100-240V, 50Hz/60Hz
Power consumption 35W (Idle) / 90W (1/8 Power)
Dimensions W 375 mm (14.8")
H 147 mm (5.8")
D 220 mm (8.7")
Net weight 4.2 kg (9.3 lbs.)
Accessories Owner’s Manual, Technical Specifications, Power Cord (2m)
Options Foot Switch: FC5, Mic Stand Adaptor: BMS-10A, Rack mount kit RK-EMX2
Others Operating Temperature : 0 to +40℃

Write a review

Note: HTML is not translated!
    Bad           Good

Yamaha EMX2

  • UPC:
  • Availability: Call Us
  • 29,450.00 МКД
  • 24,900.00 МКД

Related Products

Vonyx AM8A

Vonyx AM8A

8-channel mixer holds a 2x 500W amplifier. Giving the user a complete unit as base for this setup...

19,700.00 МКД

Yamaha EMX5014C

Yamaha EMX5014C

Console-type powered mixer delivering a solid 500 stereo watts plus effects, graphic EQ, and compres..

54,800.00 МКД 59,000.00 МКД

Yamaha EMX5

Yamaha EMX5

EMX5 Box-type robust and portable powered mixer featuring high efficiency power amplifier of 630W..

44,200.00 МКД

Vonyx AM5A

Vonyx AM5A

4-channel mixer holds a 2 x 500W amplifier. Giving the user a complete unit as base for this setup..

17,000.00 МКД

Tags: Yamaha EMX2